Qos cos-mutation – Dell POWEREDGE M1000E User Manual

Page 261

Dell Converged Enhanced Ethernet Command Reference

245

53-1002115-01

qos cos-mutation

Applies a CoS-to-CoS (COS) mutation QoS map on an interface.

Synopsis

qos cos-mutation name

no qos cos-mutation

Operands

name

Specifies the name of the CoS mutation map.

Defaults

There is no explicit CoS-to-CoS mutation QoS map applied; by default the inbound CoS equals the
outbound CoS.

Command

Modes

Interface configuration mode

Description

Use this command to apply a CoS-to-CoS mutation QoS map on an interface.

Usage

Guidelines

This command applies a CoS-to-CoS mutation map on an interface. The qos cos-mutation
command is not available if the interface is in CEE Provisioning mode. Use the no qos cos-mutation
command to remove the CoS-to-CoS mutation map.

Examples

To activate the CoS-to-CoS mutation QoS map on the interface:

switch(conf-if-te-0/1)#qos cos-mutation test

To remove the CoS-to-CoS mutation QoS map on the interface:

switch(conf-if-te-0/1)#no qos cos-mutation