Dell OptiPlex GX110 User Manual

Page 29

Back to Contents Page

Drivers and Utilities: Dell™ OptiPlex™ GX110 System User's Guide

Program Diskette Maker

Dell installed all the drivers for any integrated devices as well as the system utilities on your system's hard-disk drive. These drivers and utilities are
provided in diskette image form, from which you can make backup diskettes using the Program Diskette Maker. Dell strongly urges that you make
these backup diskettes as soon as you complete initial system setup in case you need to reinstall one of these drivers or utilities.

The Program Diskette Maker is located in the Dell Accessories program folder and contains complete online documentation on its use. To
access the Program Diskette Maker, perform the following steps:

1. Start your operating system.

2. Click Start, and then click Programs.

3. Click Dell Accessories.

4. Click Program Disk Maker.

Video Drivers

To reinstall the video drivers, perform the following steps:

1. Use the

Program Diskette Maker

(located in the Dell Accessories program folder) to make a diskette copy of the video drivers installed

on your hard-disk drive.

2. Insert the video driver diskette 1 into the diskette drive.

3. Click the Start button, click Run, type a:\setup in the Run window, and then click OK.

4. Follow the instructions that appear on your screen to complete the installation.

NIC Drivers

This section describes how to reinstall the network interface controller (NIC) driver for the following operating systems:

Windows NT 4.0 NIC Driver

The Windows NT 4.0 operating system installed by Dell automatically detects and installs the NIC driver. To reinstall the driver, perform the
following steps:

1. Use the

Program Diskette Maker

(located in the Dell Accessories program folder) to make a diskette copy of the NIC drivers installed on

your hard-disk drive.

2. Connect the network cable to the back of your computer.

See "

Network Cable Requirements

" for detailed instructions.

3. Verify that the NIC is enabled in System Setup.

See "

Network Interface Controller

" for more information.