Key combinations, Controls and indicators, Power – Dell OptiPlex GX110 User Manual
Page 130
Parallel
25-hole connector (bidirectional)
Video
15-hole connector (on video card)
Integrated network interface
controller (NIC)
RJ45 connector
Personal System/2 (PS/2>)-
style keyboard
6-pin mini-Deutsche Industrie Norm (DIN)
PS/2-compatible mouse
6-pin mini-DIN
Universal Serial Bus (USB)
two USB-compliant connectors
Internally accessible:
Primary EIDE hard-disk drive
40-pin connector on PCI local bus
Secondary EIDE hard-disk
drive
40-pin connector on PCI local bus
Diskette drive
34-pin connector
Remote Wake Up
3-pin connector
Fan
3-pin connector
Key Combinations
restarts (reboots) the system
toggles microprocessor speeds on 101-key keyboard (in MS-DOS
® real mode only)
toggles microprocessor speeds on 102-key keyboard (in MS-DOS real mode only)
starts embedded System Setup (during power-on system test [POST] only)
automatically starts (boots) the system from the network environment specified by the managed
boot agent (MBA) rather than from one of the devices in the System Setup Boot Sequence option
launches the utility partition (if installed) during system start-up
Controls and Indicators
Reset control
push button (no reset button on small-form-factor systems)
Power control
push button
Power indicators
green light-emitting diode (LED) on riser board; blinking green in sleep state; dual-color LED on
front panel
—green for power, yellow for diagnostics
Hard-disk drive access indicator
green LED
Link integrity indicator (on optional
integrated NIC connector)
green LED for 10-Mb operation; orange LED for 100-Mb operation
Activity indicator (on optional integrated
NIC connector)
yellow LED
Power
DC power supply:
Wattage
small form-factor chassis: 110 W;
low-profile chassis: 145 W;
midsize chassis: 200 W;
mini tower chassis: 200 W
Heat dissipation
small form-factor chassis: 808 BTU/hr (nominal);
low-profile chassis: 808 BTU/hr (nominal);