Great Plains YP3025 Operator Manual - Manual (Page 84)

80 YP3010HDP/3020P/3025 Table of Contents Index Great Plains Manufacturing, Inc.
401-703M Table of Contents Index 2013-09-09
20P Meter Wheel Replacement
Note: Applies only to 20P Series openers. See page 76
for 10HD and 25P Series.
Choose the correct seed meter wheel for the type of
seed you will be using. Be sure to use the same wheel
type on all meters.
Meter Wheels Not Interchangeable:
Seed meter wheels for the 20 Series row units are made of a
black color material and are not interchangeable with the
other Great Plains seed meter wheels for other machines. Use
only black wheels in 20 Series row units.
1. Clean out meter. For more information, see “Clean-
ing Out Meters” on page 95.
Refer to Figure 107
2.
Push in spring-loaded wheel retainer and make
1 ⁄
4
turn.
Refer to Figure 108
3.
Pull off wheel retainer and spring.
Refer to Figure 109
4.
Pull the seed meter wheel out about
1 ⁄
4
inch (6 mm),
and spin backward to clean out seeds from top pock-
ets.
5. Remove seed meter wheel using finger holes in
wheel face.
Figure 107: 20P:
Singulator Wheel Retainer
27459
Figure 108: 20P:
Remove Retainer and Spring
27460
Figure 109: 20P:
Remove Meter Wheel
27461