Great Plains YP3025 Operator Manual - Manual (Page 55)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 51
2013-09-09 Table of Contents Index 401-703M
Short-Term Parking
1. Fold markers. See “Folding the Markers” on
page 45.
2. Choose a location with level firm ground. Do not
unhitch on a slope.
3. Raise the planter.See “Raising Planter” on page 28.
4. Fold the planter (optional). See “Folding the
YP3010HDP/3020P/3025” on page 30.
5. Block tires.
6. Re-install the parking stand (“Hitching Tractor to
Planter” on page 15).
Refer to Figure 54 (shown without tractor for clarity)
7.
For the standard 3-point hitch, deploy the two for-
ward stands
. Remove the inner pin , swing the
stand out, down and vertical around the bottom
pin , and re-insert the pin at .
For hydraulic hitch planters, adjust hitch cylinder to
relieve weight from draw-bar.
8. Insert transport locks on all lift cylinders.
9. Disconnect hydraulic lines. Secure them so that they
do not touch the ground.
10. Disconnect electrical cables, capping where provi-
sioned.
Figure 54
Deploying 3-Point Stands
26034
7
4
6
5 5
5 4
5
6 7