Great Plains YP3025 Operator Manual - Manual (Page 126)

122 YP3010HDP/3020P/3025 Table of Contents Index Great Plains Manufacturing, Inc.
401-703M Table of Contents Index 2013-09-09
Liquid Fertilizer Tanks
This option includes the tanks plumbing subsystems,
and requires a separate manifold and pump.
For operations, see:
“Fertilizer Tanks (Option)” on page 49.
Note: On-board fertilizer tanks are not compatible with
use of the 150 bushel hopper.
Ground Drive Fertilizer Pump
One pump kit integrates with the Type 2 fertilizer mani-
fold system. The pump mounts on a wing tool bar, and
requires a planter with a 35cm (13.8in) or greater sin-
gle-row spacing, or a twin-row spacing.
Note: This pump is incompatible with 10in, 8in and 7.5in
row spacings.
This is the pump for use with the optional tanks on board
the YP3010HDP, YP3020P, YP3025. Point-row opera-
tions and swath control are not supported. The pump
operates whenever the row units are lowered and in
motion. For operations, see the Seed Rate manual.
Type 2 Fertilizer Manifold
The Type 2 system includes all plumbing from the rows,
through the planter-mounted ground drive pump, and to
the on-board 2x200 gallon tanks.
The 407-243A kit extends the inlet to the rear hitch for
use with a cart, rather than with on-board tanks.
The wing boom systems are separate for each wing
The system does not include, and requires:
• a pump (order the 407-213A Ground Drive pump,
page 122)
• a tank system, such as the 407-244A on-board 2x200
gallon tanks (page 122), or customer-provisioned cart.
• a trailer hitch weldment, 401-467A (page 120), if a cart
is used.
Option Packages Part Number
YP40 FERT TANK KIT 2X200 407-244A
Option Packages Part Number
Ground Drive Fertilizer Pump Kit 407-213A
Description Initial Order
Type 2 Fertilizer Manifold Kit 407-346A
Type 2 Boom Cart Hookup 407-243A
29300
28416
29308