Monarch Instrument DC 2000 - Manual (Page 134)

AppendixA – Configuring a 1-5 Vdc input for a 0-250 psig pressure transducer
Page 6 of 6
You will now be back at the scale setup menu. Use the up/
down arrow keys to select Scale units and touch ENTER .
The alphanumeric keypad will be displayed. This is what
will be displayed as engineering units in the trend mode
only. For this example enter PSIG and touch ENTER .
Touch EXIT several times until you are completely out of all
menus.
The 0-250 scale complete with INLET and PSIG should be displayed on the recorder. Use the
VIEW button to select a particular display to verify your work.
26.
You will now be prompted with hi
→ → → →
(some #). Enter the
high range of your scale range. For this example
(0-250 psig) enter 250.00 and touch ENTER.
25.