LaMotte SMART 2 - Manual (Page 51)

MAINTENANCE
n
CLEANING
Clean with a damp, lint-free cloth.
DO NOT ALLOW WATER TO ENTER THE COLORIMETER
CHAMBER OR ANY OTHER PARTS OF THE METER.
n
METER CARE
The optical system of the SMART2 must be kept clean and dry for optimal
performance. Dry the colorimeter tubes before placing them in the chamber to
avoid introducing moisture. For best results store the instrument in an area that
is dry and free from aggressive chemical vapors.
n
METER DISPOSAL
Waste Electrical and Electronic Equipment (WEEE)
Natural resources were used in the production of this equipment. This
equipment may contain materials that are hazardous to health and the
environment. To avoid harm to the environment and natural resources, the use
of appropriate take-back systems is recommended. The crossed out wheeled bin
symbol on the meter encourages you to use these systems when disposing of
this equipment.
Take-back systems will allow the materials to be reused or recycled in a way
that will not harm the environment. For more information on approved
collection, reuse, and recycling systems contact your local or regional waste
administration or recycling service.
SMART2 COLORIMETER 1.07 51