LaMotte SMART 2 - Manual (Page 28)

n
SEQUENCES OF TESTS
SEQUENCE 1 , SEQUENCE 2, and SEQUENCE 3 are alterable sequences.
They may be edited using the Editing Menu. Any of the LaMotte
pre-programmed tests or User Tests may be placed in these sequences in
whatever testing order that is preferred. Some examples of typical sequences
are given below.
SEQUENCE 1 SEQUENCE 2 SEQUENCE 3
* 015 Chlorine * 002 Aluminum * 003 Ammonia-N LF
079 Phosphate H 035 Cyanide 032 Cu-DDC
009 Bromine-LR 041 Fluoride 064 Nitrate-N L
076 pH TB 053 Iron Phen 067 Nitrite-N L
061 Moly-HR 055 Manganese L 074 pH CPR
086 Silica Hi 064 Nitrate-N L 078 Phosphate L
045 Hydrazine 067 Nitrite-N L 085 Silica Lo
032 Cu-DDC 077 Phenol
051 Iron Bipyr 078 Phosphate L
090 Sulfide-LR
These alterable sequences allow a series of tests to be setup that are run
frequently. The order of the individual tests in the sequence is determined by
the user. After running a test, use the * button to select the next test in the
sequence. Continue this pattern until the entire sequence has been completed.
All Tests is a fixed sequence containing the LaMotte pre-programmed tests,
User Tests, and Absorbance tests.
Modification of the alterable sequences is accomplished through the Editing
Menu
. This menu is explained in greater detail in EDITING MENU (p. 32).
Pressing the
EXIT button while in a sequence menu will escape back to the
Testing Menu .
Pressing the
OFF button at any time will turn the colorimeter off.
28 SMART2 COLORIMETER 1.07