LaMotte SMART 2 - Manual (Page 47)

n
SETTING THE CLOCK
Setting the clock allows the correct time and date stamp to be stored with each
reading in the data logger and with each reading sent out the serial port.
From the EDITING MENU use the
t button to
scroll to Set Clock. Press
Q/ENTER to select.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Editing Logging
Factory Setup
Set PWR Save
The current date and time are displayed as
month - day - year on the first line and as hours :
minutes : seconds on the second line. A
two-digit number is displayed for each setting.
Use the
t and s buttons to scroll to the
appropriate number and press
Q/ENTER to
select. The cursor will move to the next digit. Set
all subsequent numbers in the same manner.
Selecting the final digit in the seconds field stores
the date and time and returns to the
EDITING MENU
.
NOTE: These are looping menus.
SET TIME
MM - DD - YY
HH : MM : SS
EDITING MENU
* Set Clock
Editing Logging
Factory Setup
Set PWR Save
SMART2 COLORIMETER 1.07 47