LaMotte SMART 2 - Manual (Page 48)

n
TURNING THE DATA LOGGER ON AND OFF
The default setting for the datalogger is “Enabled” or turned off. If there is no
need for data logging, this setting is suggested. If data logging is needed, the
data logger can be “Enabled” or turned on.
From the EDITING MENU use the
t button
to scroll to Edit Logging. Press
Q/ENTER
to select.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Edit Logging
Factory Setup
Set PWR Save
The current setting is always displayed next to
the *. To change the setting, use the
t or s
buttons to scroll to the other setting. Press
Q/ENTER to select.
EDIT LOGGING
* Enabled
Disabled
The meter will display the message “Storing”
and return to the EDITING MENU
.
Storing
EDITING MENU
*Edit Logging
Factory Setup
Set PWR Save
48 SMART2 COLORIMETER 1.07