LaMotte SMART 2 - Manual (Page 109)

CHLORINE DIOXIDE
DPD METHOD • CODE 3644-SC
QUANTITY CONTENTS CODE
100 *DPD #1 Instrument Grade Tablets *6903A-J
15 mL Glycine Solution 6811-E
1 Tablet Crusher 0175
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents go to
www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail, phone or fax.
Chlorine dioxide is used as a substitute for and an adjunct to chlorine in water
treatment. It is better than chlorine in eliminating taste and odor in certain
cases. Chlorine dioxide, unlike chlorine, does not produce carcinogenic
chlorinated organic compounds when reacted with organic materials. A
disadvantage is the higher cost of producing chlorine dioxide compared to
chlorine.
APPLICATION: Drinking and pool waters; domestic and industrial
wastewater; food sanitization.
RANGE: 0.00–8.00 Chlorine Dioxide
METHOD: Chlorine dioxide reacts with DPD to form a red color in
proportion to the concentration.
SAMPLE
HANDLING &
PRESERVATION: Test as soon as possible to avoid loss of chlorine dioxide.
INTERFERENCE: Chlorine interference can be removed with the use of
glycine. Very high levels of chloramines may interfere if the
test result is not read immediately. Oxidized manganese
interferes but can be removed with arsenite. Bromine and
iodine interfere. Chromate interference can be removed
with a thioacetamide blank correction.
Smart2 TEST PROCEDURES 4.08 Chlorine Dioxide 1/2