LaMotte SMART 2 - Manual (Page 29)

n
GENERAL TESTING PROCEDURES
The following are some step by step examples of how to run tests from the
Testing Menu
. These test procedures are designed to be used with LaMotte
SMART Reagent Systems.
LaMotte Company continuously updates the list of pre-programmed tests as the
calibrations become available. Pre-programmed calibrations can be added to
the SMART2 Colorimeter in the field. A Windows-based computer running a
Windows Operating System and an 8 pin mini-DIN/9 pin F D-submin serial
cable (order Code 1771) are required.
Call LaMotte Technical Services at 1-800-344-3100 (410-778-3100 outside
the USA) or email at [email protected] for a current list of available
calibrations and downloading instructions.
n
TESTING WITH THE LaMOTTE
PRE-PROGRAMMED TESTS
Press ON to turn on the Smart2 Colorimeter.
The LaMotte logo will appear for about 2 seconds
and then the Start screen appears. Press the
Q/ENTER button to start testing.
VER 1.0
Smart2
* Start
The MAIN MENU will appear. Press the
Q/ENTER button to select Testing Menu.
MAIN MENU
* Testing Menu
Editing Menu
PC Link
Press the
Q/ENTER button to select All
Tests .
TESTING MENU
* All Tests
Sequence 1
Sequence 2
Press the
t button to move to the 002
Aluminum to * .
ALL TESTS
* 001 Alk - UDV
002 Aluminum
003 Ammonia - NLF
SMART2 COLORIMETER 1.07 29