E-flite DHC-2 Beaver 25e ARF - Manual (Page 5)

5 E-flite DHC-2 Beaver ARF Assembly Manual
Optional Accessories
EFLA110 Power Meter
EFL4537 Cockpit Kit
EFLA151 Pilot Bust
EFLA500 25-Size Fiberglass Floats
EFLAEC303 EC3 Device & Battery Connector,
Male/Female
EFLC3005 Celectra 1- to 3-Cell Li-Po Charger
EFLC505 Intelligent 1- to 5-Cell Balancing Charger
Required Tools and Adhesives
Tools & Equipment
EFLA250 Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257 Screwdriver, #1 and #2 Phillips
(or included with EFLA250)
EFLA251 Hex Wrench: 3/32-inch (or included
with EFLA250)
6-minute epoxy
Canopy glue
Covering iron
Drill
Drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm), 1/8-inch (3mm)
Felt-tipped pen
Flat blade screwdriver
Hobby knife (#11 blade)
Low-tack tape
Medium CA
Pencil
Phillips screwdriver: #1, #2
Pin drill
Rotary tool w/sanding drum
Ruler
Sandpaper
Side cutters
Thin CA
Threadlock
Epoxy brush
Paper towels
Epoxy mixing cups
Mixing sticks
Square
Silicone adhesive
String
Hobby scissors
Ball Driver: 3/32-inch, 7/64-inch
Rubbing alcohol
30-minute epoxy