E-flite DHC-2 Beaver 25e ARF - Manual (Page 35)

35 E-flite DHC-2 Beaver ARF Assembly Manual
 7. Place 2–3 drops of thin CA into each of the holes to
harden the surrounding wood. This hardens the wood
and provides a better bite for the screws.
 8. Install the elevator servo using the screws provided
with the servo.
 9. Repeat Steps 6 through 8 to install the rudder servo.
 10. Slide the 23 7 /
8
-inch (606mm) pushrod wire into the
tube inside the fuselage for the rudder pushrod.