E-flite DHC-2 Beaver 25e ARF - Manual (Page 41)

41 E-flite DHC-2 Beaver ARF Assembly Manual
 4. Attach the float mount to the bottom of the fuselage
using two straps, four 3mm x 12mm sheet metal screws
and a #2 Phillips screwdriver.
 5. Repeat Steps 3 and 4 for the rear mounting straps.
The main concern is the float mount is centered side to
side on the bottom of the fuselage.
 6. Using threadlock, tighten the setscrews for the cross
braces on the float mount. Assemble and attach the floats
to the float mounts using the instructions provided with
your float set. The float with the water rudder installs on
the left side of the model.