E-flite DHC-2 Beaver 25e ARF - Manual (Page 15)

15 E-flite DHC-2 Beaver ARF Assembly Manual
 11. Install the battery in the fuselage using the two velcro
straps. The battery can be moved forward or rearward
to correct for the Center of Gravity if necessary. You may
also wish to use some hook and loop tape on the tray to
secure the battery from sliding fore or aft.
 12. You may elect to cut a hole for exit air in the aft
area of your fuselage. You will notice we have designed
the structure so that an air exit hole may be located in
the following position. Using the batteries listed in this
manual, we found no need for an air exit hole in the
fuselage.