E-flite DHC-2 Beaver 25e ARF - Manual (Page 21)

21 E-flite DHC-2 Beaver ARF Assembly Manual
 15. Using a ruler, mark the servo cover as shown
using a pencil.
 16. Repeat Steps 1 through 6 to attach the flap servo to
the servo cover. Align the servo arm on the intersection of
the lines drawn in the previous step.
 17. Secure a 3-inch (76mm) extension to the flap servo
lead. Tie the string to the flap servo extension and pull
both the aileron and flap leads to the hole in the bottom
of the wing. Use tape to keep the leads from falling back
into the wing.