E-flite DHC-2 Beaver 25e ARF - Manual (Page 19)

19 E-flite DHC-2 Beaver ARF Assembly Manual
 9. Tie the string to the servo extension and pull it to the
opening for the flap servo at this time.
 10. Secure the aileron servo cover to the wing
using four #2 x 3/8-inch sheet metal screws and a
#1 Phillips screwdriver.
 11. Slide the bend of the 2 3 / 16
-inch (56mm) pushrod into
the hole of the aileron servo. Secure the pushrod using
the pushrod connector.