E-flite DHC-2 Beaver 25e ARF User Manual

Page 18

E-flite DHC-2 Beaver ARF Assembly Manual



6. Use a #1 Phillips screwdriver to install the screws

provided with the servos to attach the servo to the

servo mounting blocks.



7. Remove any of the unnecessary arms from the

servo horn using side cutters. Enlarge the outer hole

of the servo arm with a pin drill and 5/64-inch

(2mm) drill bit.



8. Secure a 9-inch (228mm) servo extension to the

aileron servo. Use string or a commercially available

connector to keep them from unplugging inside the

wing accidentally.