E-flite DHC-2 Beaver 25e ARF - Manual (Page 48)

48 E-flite DHC-2 Beaver ARF Assembly Manual
Ailerons
Low Rate: 1/2-inch (13mm) (Up/Down)
High Rate: 3/4-inch (19mm) (Up/Down)
Elevator
Low Rate: 5/8-inch (16mm) (Up/Down)
High Rate: 1-inch (25mm) (Up/Down)
Rudder
Low Rate: 1 1 / 4
-inch (32mm) (Right/Left)
High Rate: 1 1 /
2
-inch (38mm) (Right/Left)
Flap
Half Flap: 1/2-inch (13mm) (Down)
Full Flap: 1
3 /
8
-inch (35mm) (Down)
These are general guidelines measured from our own flight tests.
You can experiment with higher rates to match your preferred
style of flying.
Once all the control throws have been set, make sure to slide
the clevis retainers over the clevises to prevent them from
opening accidentally.
Range Test Your Radio
 1. Please consult your radio instructions for complete range
testing instructions.
 2. Double-check that all controls (aileron, elevator, rudder
and throttle) move in the correct direction.
 3. Be sure that your transmitter batteries are fully charged,
per the instructions included with your radio.