E-flite DHC-2 Beaver 25e ARF - Manual (Page 22)

22 E-flite DHC-2 Beaver ARF Assembly Manual
 18. Slide the bend of the 2 1 /
2
-inch (58mm) pushrod into
the hole of the flap servo. Secure the pushrod using the
pushrod connector. Slide a clevis retainer onto a nylon
clevis. Thread the clevis onto the pushrod.
 19. Position the flap servo partially in the wing. Connect
the clevis to the flap control horn. Plug the flap servo into
the receiver and power up the radio system.