beautypg.com

E-flite DHC-2 Beaver 25e ARF User Manual

Page 17

background image

17

E-flite DHC-2 Beaver ARF Assembly Manual



3. Position the servo between the servo mounting

block. Use a pencil to mark the locations for the servo

mounting screws on the blocks. The servo should not

touch the cover to prevent it from absorbing vibrations

from the airframe. You may have to notch the servo block

to allow access for the servo wire.



4. Use a drill and 1/16-inch (1.5mm) drill bit to drill

the holes for the servo mounting screws.



5. Apply a few drops of thin CA to each of the

holes drilled in the previous step to harden the

surrounding wood.