Metrohm IC Net 2.2 - Manual (Page 93)

6.7 709 IC Pump
IC Net 2.2 85
Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
ValveA fill, inject Switch injection valve A to “ fill ” or
“ inject ” position.
ValveB fill, inject Switch injection valve B to “ fill ” or
“ inject ” position.
Step Rotate suppressor to the next
position.
Links
The
Links
tab of the
733 IC Separation Center
is used for COM port
selection and settings (details see section 5.2.4 Links), resp. for
Event line selection.
6.7 709 IC Pump
6.7.1 709 IC Pump features
The Metrohm 709 IC Pump is a serial dual piston high pressure
pump for ion chromatography. The two following versions are
available:
• 2.709.0010 IC Pump (standard version)
• 2.709.0110 IC Pump (metal-free version)
The 709 IC Pump, which is normally operated using the keypad of
the instrument or via 732 IC Detector, can be fully operated using
the «IC Net» program. It can be connected either to the 732 IC
Detector using the 6.2125.060 cable, to the 762 IC Interface using
the 6.2134.080 or 6.2134.090 cable, or to a PC COM port using
the 6.2134.040 or 6.2134.100 cable. If it is connected to the 732
IC Detector, the
Isocratic pump 709 for 732 device must be selected
for the installation of the 709 IC Pump in a system. If it is con-
nected to the 762 IC Interface, the
Isocratic pump 709 device must
be selected for the installation of the 709 IC Pump in a system.
Examples for interconnections with the 709 IC Pump can be
found in the 762 Instructions for Use.