Metrohm IC Net 2.2 - Manual (Page 140)

6 Devices
IC Net 2.2 132
Status display
The current status of the 788 IC Filtration Sample Processor can
be displayed on the
Current state subtab of the Manual tab which
is only available for a connected system.
Sample Display of current sample position.
Vial position Display of current beaker position.
Lift position
Display of current lift position in mm.
Pump state Display of current pump state ( on , off ).
Status of the 8 input lines
Status of the remote input lines.
Status of the 14 output lines
Status of the remote output lines.
Read current values from 788 IC Filtration
Sample Processor.
For detailed information about the 788 IC Filtration Sample Proc-
essor see 788 Instructions for Use.
Time program
On the Program tab of the 788 IC Filtration Sample Processor win-
dow a user-defined time program can be entered. This program
is started automatically as defined in the
Start mode window (see
section 4.4.3) either at the moment the determination is started
(
Start with determination ) or at the moment the sample is injected
( Start with inject ).