Metrohm 763 PVC Thermomat Manual - Manual (Page 94)

4.7 Results
763 PVC Thermomat
87
Parameters
Parameters tab of the Determination and method data window with the dis-
play of the measuring parameters used in the determination.
Temperature Set temperature of sample.
Delta T Temperature correction: Correction value for
increasing the block temperature in order to
reach the set temperature in the sample.
Gas flow Gas flow through sample.
Start options
Start delay Delay time until start of measurement.
Start mode Mode for starting the channels:
per channel All channels have been started individually.
per 2 channels Each 2 channels have been started together.
per block 4 channels in one block have been started to-
gether.
Stop criteria
Time Time until automatic termination of determina-
tion.
Conductivity Conductivity limit. When this value is reached
the determination is automatically terminated.
Endpoint(s) Automatic termination of the determination
when each active channel has reached all end-
points.