Metrohm 763 PVC Thermomat Manual - Manual (Page 69)

4 Operation
763 PVC Thermomat
62
Standards
Tab Standards of the Method parameters window with parameters for cal-
culating the standard time.
Calculate standard time Switches the calculation of the standard time
according to the following equation on/off:
Standard time = Factor
(Temperature - Target temperature)/10
×× Induction time
Formula parameters
Factor
Parameter for calculating the standard time
which gives the factor by which the time
changes by 10 °C. This value can be deter-
mined by the extrapolation (see section 4.7.8)
of results obtained at different temperatures.
Target temperature Target temperature for calculating the standard
time.