Metrohm 763 PVC Thermomat Manual - Manual (Page 35)

3 Operating tutorial
763 PVC Thermomat
28
3.2.3 Graphics
Curves for each determination in a determination overview can be
shown, printed out and copied.
1 Open single graph
⇒ Mark the determination in the determination overview whose
single curve is to be displayed.
⇒ Click on or Determination / Graphics / Single graph in the
results window. A new window is opened in which the single
graph for the determination selected in the determination
overview is shown. The sample identifiers
ID 1
and
ID 2
are
shown in the window title. If present then the determined In-
duction time (red vertical line and numbers) and Stability time
(black vertical line and numbers) will be shown in the graph-
ics window as well as the measuring curve (green).
2 Open multiple graph
⇒ Mark the determinations in the determination overview whose
curves are to be displayed in a multiple graph.
⇒ Click on or Determination / Graphics / Multiple graph in the
results window. A new window is opened in which all curves
for the determinations marked in the determination overview
are shown. The individual measuring curves are shown in
color, the legends referring to the colors (
ID 1 and ID 2 ) are
located in the graph header. If present the determined Induc-
tion time
( ) and
Stability time
( ) will also be shown.