Metrohm 763 PVC Thermomat Manual - Manual (Page 16)

2.1 Setting up the instrument
763 PVC Thermomat
9
2 Installation
2.1 Setting up the instrument
2.1.1 Packaging
The 763 PVC Thermomat is supplied together with the separately
packed accessories in special packaging containing shock-absorbing
foam linings designed to provide excellent protection. The instrument
itself is packed in an evacuated polyethylene bag to prevent the ingress
of dust. Please store all these special packaging as only they assure
transport of the instrument free from damage.
2.1.2 Check
After receipt, immediately check whether the shipment is complete and
has arrived without damage (compare with delivery note and list of
accessories in section 6.2). In the case of transport damage, see
instructions in section 6.4.1 "Warranty".
2.1.3 Location
Position the instrument in the laboratory at a location convenient for op-
eration, free from vibrations and protected against a corrosive atmos-
phere and contamination by chemicals. It is advisable to set up the in-
strument in a fume cupboard to guard against odor emission, but the
PC can be positioned outside on the regular laboratory bench.
In order to improve accessibility to the measuring places the instru-
ment can also be placed on the 6.2059.000 Rotation ring, which is
available as an option.