Metrohm 763 PVC Thermomat Manual - Manual (Page 127)

4 Operation
763 PVC Thermomat
120
• Select the channels, for which the temperature test has to be
carried out. Enter the desired
Test duration per channel
and
click on .
3 Insert GLP test set
• Insert the temperature sensor 36 36 into the opening of the PTFE
cylinder 38 38 from above (see Fig. 6).
• Position aluminium cylinder 41 41 vertically and introduce tem-
perature sensor 36 36 into the aluminium cylinder from above
until it reaches the stop.
• Fasten temperature sensor 36 36 to aluminium cylinder 41 41, by
gently tightening hexagonal screw 39 39 with the help of Allen
key 40 40.
• Place temperature sensor 36 36 together with PTFE and alu-
minium cylinder in the first channel selected for Block A.
• Connect temperature sensor 36 36 to connection 17 17 "Pt100" on
the rear panel of the 763 PVC Thermomat and click on
to start the measurement.