Metrohm 763 PVC Thermomat Manual - Manual (Page 62)

4.5 Methods
763 PVC Thermomat
55
Method name Name of the method.
Creation date Date and time at method creation.
Creator Name of the logged-in user at method creation.
Rename the selected method.
Delete the selected method.
Open the method parameters window (see
section 4.5.2).
Save method
In the Method parameters window (see section 4.5.2) the two following
buttons are available for storing an opened method:
Saves the method under the same name.
Saves the method under a new name. The old
method is retained. Methods can also be cop-
ied in this way.
Print method report
The following button is available in the
Method parameters
window (see
section 4.5.2) for printing out all the method parameters of the opened
method:
Prints out method report.
4.5.2 Method parameters
Overview
763 PVC THERMOMAT CONTROL / File / Open method
By clicking on this menu item or on beside the method name in the
operating field of the
763 PVC THERMOMAT CONTROL
window the window
with the method parameters opens; it contains the following tabs:
Parameters
Measuring parameters.
Evaluation
Parameters for curve evaluation.
Curves Parameters for scaling the axes.
Formulas Equation input for further calculation of the
induction and stability times.
Standards Parameters for calculating the standard time.
Documentation Parameters for report output.
Description Freely-definable comments about method.