Metrohm NIRS XDS Transmission OptiProbe Analyzer - Manual (Page 35)

▪▪▪▪▪▪▪ 33
Vision asks if the default directory location is
acceptable.
Click on “Yes”. Vision creates a directory for the
project as shown.
Vision prompts the user to connect to the
instrument. Be sure the instrument is turned on
and is ready.
Click on “Use Existing Data”.
Before connection, the Project Options must be
set.
Click on “Configure, Options.”
For the XDS OptiProbe Transmission Pair, the
Project Options should be selected as shown.
To select or de-select an option, click on the box to
the left of a given option.
When finished, click “OK”.