Metrohm NIRS XDS Transmission OptiProbe Analyzer - Manual (Page 19)

▪▪▪▪▪▪▪ 17
Network Solution 2:
Returning to the Local Area
Connection Status dialog box, note
these items for the computer:
• Address Type:
(should be “assigned by
DHCP”)
• IP Address:
Write this address down for
the next step
• Subnet Mask:
Write this down for the next
step
If connection cannot be achieved, it
may be necessary to verify that the
XDS instrument is installed “within
the IP address range” of the
computer.
Network Solution 3:
Verify network has full IPv4
compatibility.
Some networks have moved to Ipv6
(Internet Protocol version 6) which
uses different address formats.
The IT department at your company can verify if the
network offers full Ipv4 compatibility. If the network has
migrated to Ipv6 operation, a “compatibility pack” may
need to be loaded to support Ipv4-enabled devices.