Metrohm NIRS XDS Transmission OptiProbe Analyzer - Manual (Page 20)

18 ▪▪▪▪▪▪▪
Network Solution 4:
Verify that the Firewall on the
computer has Vision loaded as an
“exception”.
This is located under “Control Panel”,
“Windows Firewall”.
If this is not enabled, click “Add
Program” and select “Vision” from
the list.
When finished, click “OK”
Network Retry, XP and Vista:
Windows XP and Vista users
should click on “Retry Only”.
This command resets the
communication port, and allows
Vision to “find” the instrument,
if connected properly.
Network Retry, Windows
2000:
Windows 2000 users should
click on “Retry/Reset”. This
command resets the
communication port, and also
resets Windows 2000 to the
proper state to connect using a
dynamic IP address in the XDS
instrument.