Metrohm NIRS XDS Transmission OptiProbe Analyzer - Manual (Page 26)

24 ▪▪▪▪▪▪▪
13. When all the above assembly is finished,
turn on the power switch on the
monochromator. It is located on the lower
surface, on the right-hand side as shown.
The monochromator performs some
initialization tests, which take a moment.
Some noises will be heard as items find
their initial positions. This is normal.
14. This instrument is shown without probe
barrels.
Prepare to establish communication from
Vision to the XDS instrument. This is
detailed in Section 6.0, Vision Software.
This completes assembly of the OptiProbe Transmission Analyzer. See section 5.0 for full instructions
on probe assembly.