Metrohm 920 Absorber Module - Manual (Page 88)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
80 ￭￭￭￭￭￭￭￭
920 Absorber Module
NOTE
It can sometimes happen that an instrument is not automatically
recognized when it is newly connected to an existing system.
When an instrument is not automatically recognized, then the
"basic initialization" has to be run in MagIC Net. Additional infor-
mation concerning the basic initialization can be found in the
MagIC Net online help or in the MagIC Net manual.
3 Loading the method
Workplace ▶ Run
￭ Activate the Equilibration tab.
￭ In the Method field, load the Preparation of Combustion IC
method.
4 Starting equilibration
￭ Start the equilibration with [Start HW].
The instrument is ready to measure as soon as equilibration has fin-
ished.