Metrohm 920 Absorber Module - Manual (Page 47)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭ 39
4.4 Dosino for the absorber solution
Figure 10 Installing the Dosino for the absorber solution
9 PTFE capillary, 0.5 mm ID / 3 m
(6.1803.030)
Connection between the Metrosep A Trap 1
- 100/4.0 trap column (6.1014.000) and the
Combustion Module. 10 PTFE capillary, 0.5 mm ID / 3 m
(6.1803.030)
Approx. 20 cm. Connection between the
Dosino with the absorber solution and the
Metrosep A Trap 1 - 100/4.0 trap column
(6.1014.000).
11 FEP tubing M6 for 920, 150 cm
(6.1838.020)
Aspiration tubing for the absorber solution.
Connection between the Dosino with the
absorber solution and the bottle with the
absorber solution.
12 FEP tubing M6 for 920, 9 cm
(6.1838.040)
Connection between the Dosino with the
absorber solution and the T connection.
The Dosino for the absorber solution is equipped with a 10 mL dosing unit
and has the following tasks:
￭ Dosing the absorber solution.
￭ Transferring the absorption solution to the 10-port valve.