Metrohm 920 Absorber Module - Manual (Page 56)

4.4 Dosino for the absorber solution
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48 ￭￭￭￭￭￭￭￭
920 Absorber Module
At inlet … Install this accessory
2 FEP tubing M6 for 920, 9 cm (6.1805.040) from Dosino for ultrapure
water (7-
13 )
3 Transfer tubing (4- 2 )
Installing the T connection
1
2
3
6.1805.040
6.1805.040
6.1808.060
6.1562.130
1 Connecting the FEP tubing
Screw the loose end of the FEP tubing connected to port 3 of the
Dosino for ultrapure water to an inlet (1) on the T connection.
2 Connecting the transfer tubing
Screw the longer end of the transfer tubing to the outlet (3) on the T
connection.
3 Connecting the FEP tubing
Screw the loose end of the FEP tubing connected to port 1 of the
Dosino for the absorber solution to the last inlet (2) on the T connec-
tion.
Next step ￭ Connect the transfer tubing to the 10-port valve (see Chapter 4.5.1,
page 55).