Metrohm 920 Absorber Module - Manual (Page 62)

4.5 10-port valve
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭
920 Absorber Module
3 Fill the adsorber tube with a little cotton and adsorber granulate and
seal it with the plastic cover.
4 Place the adsorber tube into the large opening of the bottle attach-
ment and fasten it in place with the SGJ clip.
5 Seal the M8 opening with a stopper.
4.5 10-port valve
The 10-port valve can be connected after both Dosinos and the two trap
columns have been installed.
Figure 13 Connecting the 10-port valve
2 PEEK capillary, 0.5 mm ID / 15 cm
(6.1831.040)
Connection between the 6-port valve and
the 10-port valve. 3 PTFE capillary, 0.75 mm ID / 3 m
(6.1803.160)
Approx. 80 cm. Connection between the
10-port valve and the bottle with the stand-
ard solution.