Metrohm 920 Absorber Module - Manual (Page 67)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭ 59
Inserting the bottle with the standard solution into the
instrument
1 Insert the bottle with the standard solution into the bottle holder.
4.5.3 Connecting the bottle with the check standard
The bottle with the standard solution is connected to the 10-port valve.
Connecting the bottle with the check standard
1 Guide the loose end of the capillary (13-4) (connected to port 3 of
the 10-port valve) in through a capillary feed-through between the
device and the bottle holder on the side of the instrument.
2 Fasten the capillary in the bottle containing the check standard.
Place the bottle on the bottle holder.