Diode LED Mist-Resist - Manual (Page 3)

DIODELED.COM 1.877.817.6028
MIST RESIST EMBER™ LED STRIP LIGHT
PLUG-IN ADAPTER WIRING DIAGRAM
DIMMING LOW VOLTAGE WIRING DIAGRAM- REIGN 12V-24V DIMMER SWITCH
120V MAGNETIC LOW VOLTAGE DIMMER SWITCH WIRING DIAGRAM
Standard Dimmable Driver Configuration*
*Only use recommended 120V MLV dimmer switches.
See the compatibility list for a detailed list of compatible
dimmers.
N= Neutral / L= Line / H=Hot
Ground
H
N
120V AC
Power
Hardwired Magnetic
Dimmable Driver
120V AC Magnetic
Low Voltage
Dimmer Switch
Dimmable LED Fixture
L
H N
N
V+ (Red)
V– (Blue)
3-Way Dimmable Driver Configuration*
*Only use recommended 3-Way dimmer switches for 3-Way
dimming applications. See the dimmable driver overview at
www.diodeled.com for a detailed list of compatible dimmers.
Traveling
Lines
Ground
H
N
120V AC
Power
3-Way On/OFF
Switch
120V AC Magnetic
Low Voltage
3-Way Dimmer
Dimmable LED Fixture
L
H N
N
N= Neutral / L= Line / H=Hot
120V
Power
N N
H L
V+
V+
V-
V-
(Low Voltage Driver Required)
AC
INPUT
(High Voltage)
DC
OUTPUT
(Low Voltage)
LED Strip Light
LED Strip Light
120V
Power
N N
H L
V+
V+
V+
V-
V-
V-
(Low Voltage Driver Required)
REIGN 12V-24V
Dimmer Switch
AC
INPUT
(High Voltage)
DC
OUTPUT
(Low Voltage)
V- = (Black)
V+ = (Red)
NOTE:
The REIGN Switch is only compatible with low
voltage constant voltage driver. DO NOT USE
a dimmable driver with the REIGN switch.
Accessory Note:
All DC plug accessories are to be connected
between the power supply and the light fixture.
In-line Accessory
12V DC
Plug-in
Adapter