Brandmotion 1008-9525-V2 - Manual (Page 20)

INSTALLATION INSTRUCTIONS
9520 and 9525 Instructions 9-24-12.doc 20 of 34
Section 9: Chassis Harness Installation continued
63. Route the exterior portion of the supplied chassis
harness along existing vehicle chassis harness and
over fuel tank. Using supplied tie wraps, secure the
harness to existing wiring at 2 inch intervals (Figures
45 and 46).
Figure 45
Figure 46
64. Loop any excess from the harness as shown and
secure with tie wraps (Figure 47).
Figure 47
65. Plug the chassis harness into the camera harness
installed earlier under the pickup bed (Figure 48).
Figure 48
66. Start vehicle with foot on brake and shift into
reverse to check camera operation. If all of the
connections are correct, you will see an image
displayed on the left side of the supplied mirror.
67. Reinstall all previously removed interior and exterior
parts.