Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 55)

Configuring the Scanner or Bridge 5-7
Tables 5.4 and 5.5 define the number of 16-bit words that
you need for input and output depending on your
configuration.
Note: For instructions on configuring the I/O for the module (I/O
Config (23)) and the Master-Slave Hierarchy (M-S Input (35) and M-
S Output (36)), refer to chapter 4, Configuring the Module.
Step 5. Click Next > to display the next page as shown in figure
5.9.
Table 5.4 – SP600 and LiquiFlo 2.0 (16-Bit Reference/Feedback and
Datalinks)
Input
Size
Output
Size
Logic
Command/
Status
Reference/
Feedback
(16-bit)
Datalinks (16-bit)
A B C D
4 2 4 4
6 4 4 4 4
8 6 4 4 4 4
10 8 4 4 4 4 4
12 10 4 4 4 4 4 4
Table 5.5 – GV6000 16-Bit Reference/Feedback and 32-bit Datalinks)
Input
Size
Output
Size
Logic
Command/
Status
Reference/
Feedback
(16-bit)
Datalinks (32-bit)
A B C D
4 2 4 4
8 6 4 4 4
12 10 4 4 4 4
16 14 4 4 4 4 4
20 18 4 4 4 4 4 4
Figure 5.9 – Module Properties Dialog Box - Page 2