Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 145)

EtherNet I/P Objects C-9
Services
11 Get Maximum
Value 1 3
12 Get Default Value 1 3
13 Get Scaling
Multiplier UINT 3
14 Get Scaling Divisor UINT 3
15 Get Scaling Base UINT 3
16 Get Scaling Offset UINT 3
17 Get Multiplier Link UINT 3
18 Get Divisor Link UINT 3
19 Get Base Link UINT 3
20 Get Offset Link UINT 3
21 Get Decimal
Precision USINT 3
1 Access rule is defined in bit 4 of instance attribute 4. 0 = Get/Set, 1 = Get.
2 Specified in descriptor, data type, and data size.
3 Value varies based on parameter instance.
4 Refer to the EtherNet/IP specification for a description of the link path.
Attribute
ID
Access
Rule Name Data Type Description
Service Code
Implemented for:
Service Name Class Instance
0x01 Yes Yes Get_Attribute_All
0x05 Yes No Reset
0x0E Yes Yes Get_Attribute_Single
0x10 Yes Yes Set_Attribute_Single
0x4B No Yes Get_Enum_String