Rockwell Automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifier Module Replacement Kit - Manual (Page 30)

Publication PFLEX-IN023A-EN-P
30
14. Remove the four M10 bolts and washers that secure the power cables to the
rectifier circuit output terminals.
15. Remove the four M10 nuts and washers that secure the other end of the
power cables to the DC– and DC+ collector bus bars and remove the cables.
Remove nuts
from bus bars
17 mm
20 N•m
(177 lb•in)
Remove bolts from
output terminals
17 mm
20 N•m
(177 lb•in)
Power cables