Rockwell Automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifier Module Replacement Kit - Manual (Page 20)

Publication PFLEX-IN023A-EN-P
20
Remove the Bus Bars from a 600/690V AC Input Drive
– Remove the four M6x25 hexalobular screws that secure the outer bus
bar to the drive and remove the bus bar and the loose bus bar insulator
sheet.
– Remove the four M6x20 hexalobular screws that secure the next bus bar
to the drive and remove the bus bar and the loose bus bar insulator
sheet.
– Remove the two M6x20 hexalobular screws that secure the main DC-
bus bar to the drive and remove the main DC- bus bar and the loose bus
bar insulator sheet.
– Remove the two M6x16 hexalobular screws that secure the main DC+
bus bar to the drive and remove the main DC+ bus bar and the loose
capacitor insulator sheet.
T30
4.0 N•m
(35.4 lb•in)
Bus bar
insulator sheets
Capacitor
insulator sheet
T30
4.0 N•m
(35.4 lb•in)
Do Not reuse this
insulator sheet.
Replace with new
insulator sheet.
Outer Bus Bar
DC- Bus Bar
DC+ Bus Bar