Rockwell Automation GV3000/SE AC Drive 30-100HP, 230VAC V6.04 Hardware Ref, Install, Troubleshooting - Manual (Page 14)

1-2 GV3000/SE 230 VAC 30-100 HP Drive, Hardware Reference Version 6.04
Describes the equipment that is needed to troubleshoot the drive
and how to measure DC bus voltage. A replacement part list is
also provided.
• Appendix A - Technical Specifications
Lists drive specifications in table form.
• Appendix B - 30-100 HP GV3000/SE System Wiring Diagram
Provides additional wiring information for the 30-100 HP drives.
1.2 Assumptions About the Audience
This manual is intended for qualified electrical personnel. It is task-oriented and is
organized according to a logical progression of steps to be followed to install and
troubleshoot the drive.
1.3 Understanding Terms Used in this Manual
The following terms are defined according to the way they are used in this manual:
• GV3000/SE drives will typically be referenced by horsepower. If additional
clarity is required, drive model numbers will also be included.
• Parameters will be referenced either as parameter (P.030) or Elapsed Time
Meter Reset (P.030).
1.4 If You Want to Know More
Refer to the following related publications as necessary for more information:
• GV3000/SE 230 VAC General Purpose (Volts/Hertz) and Vector Duty Drive
Software Start-up and Reference manual (D2-3416-1).
• Instruction manuals listed in Table 2.3.
1.5 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance,
call 1-800-726-8112.