Rockwell Automation WebPak 3000 User Guide - Manual (Page 85)

Index Index-1
I
NDEX
A
AC LINE VOLTAGE HIGH alarm, 5-2
AC LINE VOLTAGE LOW alarm, 5-2
ACCELERATION TIME (P.001), 5-11
alarms
identifying, 7-1
resetting and clearing logs, 7-4
reviewing and resetting, 7-2
reviewing logs, 7-3
ANLG TACH VOLTS /1000 (P.203), 5-11
ARM VOLTS , 6-1
arrow keys, 2-3
C
CANCEL key, 2-2
characters, on display, 2-8
clock, resetting, 7-9
CML PI LEAD FREQUENCY , 5-4
CML PI PROP GAIN , 5-4
CML REF RATE LIMIT , 5-4
coast/stop pushbutton, 2-4
code numbers (parameter), 3-3
configurable (parameter type), 4-1
configuration
protecting, 4-7
using Quick Start, 5-2
using the
OIM , 4-1
control keys, 2-4
control source, 6-2
effect on reference, 6-3
setting, 6-4
CONTROL SOURCE SELECT key, 2-4
controlling drive, using OIM , 6-4
current minor loop, self-tune, 5-4
D
DECELERATION TIME (P.002), 5-12
define user units, 3-5
diagnostics, 7-5
display, 2-5
characters, 2-8
contrast, 3-2
drive
jogging, 6-4
running, 6-4
starting, 6-4
status indicators, 2-6
stopping, 6-5
E
ENCODER PPR (P.027), 5-11
ENTER key, 2-3
error message, clearing, 7-7
exit
Quick Start, 5-1
self-tune, 5-7
F
fatal
OIM error, 7-7
regulator failure, 7-7
FAULT key, 2-2
faults
during self-tune, 5-7
identifying, 7-1
resetting and clearing logs, 7-4
reviewing and resetting, 7-2
reviewing logs, 7-3
FEEDBACK SELECT (P.200), 5-10
H
hardware
manual, 1-1
program protection, 4-7
help
monitor mode, 6-2
program mode, 4-3
HELP key, 2-2
I
indicators
drive status, 2-6
key, 2-7
input (parameter type), 4-1
IR COMPENSATION (P.206), 5-14