Rockwell Automation FactoryTalk View Site Edition Installation Guide - Manual (Page 137)

9 • U PGRADING AN OPERATING F ACTORY T ALK V IEW SE APPLICATION
123
•
•
•
• •
Step 10 – Upgrade software components on Server #1
To upgrade FactoryTalk View SE and supporting software on Server #1, perform these
tasks.
 Install FactoryTalk View SE
 Install any necessary product updates
Install FactoryTalk View SE
1. Close all open Windows programs.
2. Place the FactoryTalk View Installation DVD in the computer’s DVD drive.
If the DVD does not start automatically, run D:\Setup.exe, where D: is the drive
containing the DVD.
3. Select Site Edition Server and click Next.
Install any necessary product updates
For instructions, see “Installing product updates” on page 132.
Step 11 – Restore Server #1 as the primary application server
To restore Server #1 as the FactoryTalk Network Directory and the primary server,
perform these tasks:
 On Server #2, back up the migrated application
 Copy backed-up application files to Server #1
 On Server #1, restore the HMI project and application
 Specify Server #1 as the primary HMI and data server
 Specify Server #1 as the Network Directory for clients
 Test run the application from all upgraded clients
On Server #2, back up the migrated application
To prepare to move migrated application data to Server #1, back up the migrated HMI
project and application files on Server #2.
FTViewSEInstallENU.book Page 123 Wednesday, July 16, 2014 10:53 AM