Rockwell Automation FactoryTalk View Site Edition Installation Guide - Manual (Page 131)

9 • U PGRADING AN OPERATING F ACTORY T ALK V IEW SE APPLICATION
117
•
•
•
• •
1. On Workstation #1, click Start > All Programs > Rockwell Software > FactoryTalk
Tools, and then click Specify FactoryTalk Directory Location.
To use the FactoryTalk Directory Server Location Utility, you have to log on as an
administrator on the local computer.
2. Server #1 should be displayed in the field, Computer hosting the directory server.
Click the Browse button.
3. In the FactoryTalk Directory Server Configuration dialog box, click This computer,
and then click OK.
To change the Network Directory location, you have to log on as an administrator on
the new Network Directory computer (local or remote).
4. Click OK, and then restart Workstation #1.
Install FactoryTalk View SE
1. Close all open Windows programs.
2. Place the FactoryTalk View Installation DVD in the computer’s DVD drive.
If the DVD does not start automatically, run D:\Setup.exe, where D: is the drive
containing the DVD.
3. Select Studio Enterprise from the FactoryTalk View Product list and click Next.
Install any necessary product updates
For instructions, see “Installing product updates” on page 132.
Specify Server #2 as the Network Directory location
After upgrading the software on Workstation #1, specify Server #2 as the Network
Directory location.
To specify Server #2 as the Network Directory
1. On Workstation #1, click Start > All Programs > Rockwell Software > FactoryTalk
Tools, and then click Specify FactoryTalk Directory Location.
To use the FactoryTalk Directory Server Location Utility, you have to log on as an
administrator on the local computer.
2. Localhost should be displayed in the field, Computer hosting directory server. Click
the Browse button.
3. In the FactoryTalk Directory Server Configuration dialog box, type Server #2, and
then click OK.
FTViewSEInstallENU.book Page 117 Wednesday, July 16, 2014 10:53 AM